Even though KEYKING Controllers can handle any reader in the market, KEYKING has an excellent line of readers of its own.

KEYKING Readers do not compromise on performance and have longer sensing range than its competitors while keeping smaller size at the same time.

Most readers are available with 12″ Cable or Phoenix Type Green Connector.

Technologies available are: 125KHz EM (26/34 BIT), 125KHz HID Prox. Comp., 13.56MHZ Mifare, DESFire, U-SIM, Encrypted with Private Key and others.

Clock & Data communication available on request as well.

3.5" x 3.5" Standard Reader

3.5″ x 3.5″ Standard Reader

6609 is the most commonly used model. It is available in Black or Silver-Black pattern. 6609 readers have field-select capability between 26 and 34 BIT on the EM Models. The reader is molded and adequate for outside installation  It is available with 12″ Cable or Phoenix Connector. LED has Blue KEYKING Logo turning to Green when access granted. When connected to KEYKING controllers, beeps deferential between Authorized and Decline. Power requirements are 7-15Vdc, 50mA only.

 

 

 

Slim Reader 1.8" x 3.5"

Slim Reader 1.8″ x 3.5″

6610 is the Slim version of the 6609. Even though it is half the size, its performances are the same. 6610 has only one design, but it beat everybody else. 6610 readers have field-select capability between 26 and 34 BIT on the EM Models. The reader is molded and adequate for outside installation  It is available with 12″ Cable or Phoenix Connector. LED has Blue KEYKING Logo turning to Green when access granted. When connected to KEYKING controllers, beeps deferential between Authorized and Decline. Power requirements are 7-15Vdc, 50mA only.

 

 

 

 

 

 

Card Reader with Display

Card Reader with Display

Keypad Reader with Display

Keypad Reader with Display

6611 is the “fancy” readers. All have OLED Display that can be configured to show time and predefined messages using RS-485 connection. These readers are not weather-proof and should be protected from direct sun and rain. The 6611 available only with Phoenix Connector. 6611 readers have field-select capability between 26 and 34 BIT on the EM Models. Keypad models have additional “DoorBell” button and separate contact. LED has Blue KEYKING Logo turning to Green when access granted. When connected to KEYKING controllers, beeps deferential between Authorized and Decline. Power requirements are 12Vdc, 100mA only.

 

 

 

 

 

Vandal Resistant Keypad Reader

Vandal Resistant Keypad Reader

Vandal Resistant Keypad Reader

Vandal Resistant Keypad Reader

The Vandal Resistant Readers are made of Stainless Steel and can stand severe blows and breaking attempts  As such, they come equipped with Optical Tamper Sensor . The readers have field-select capability between 26 and 34 BIT on the EM Models. The reader is molded and adequate for outside installation  It is available with 12″ Cable only. Keys are lit Blue. When connected to KEYKING controllers, beeps deferential between Authorized and Decline. Power requirements are 7-15Vdc, 100mA only.

 

 

 

 

 

Desktop USB

Desktop USB

Desktop Readers / Enrollers / Encoders are for new users enrollment, card replacement and visitor management. they connect to a USB port on the computer. Note that there is a special Programmer for the encrypted cards used in Access Control and Hotel Locks. All desktop readers / writers are configurable to fit special customization if needed